User manual

Sym-
bol
Function Description
Time of day To set, change or check the time of day. Refer to "Set-
ting the time of day".
Duration To set how long the appliance must operate. First set an
oven function before you set this function.
End To set when the appliance must be deactivated. First set
an oven function before you set this function. You can
use Duration and End at the same time (Time Delay) to
set the time when the appliance must be activated and
then deactivated.
Press again and again to
change the clock function.
Press to confirm the settings
of the clock functions, or wait 5
seconds for the setting to be con-
firmed automatically.
6.1 Setting the Duration or End
function
1.
Press again and again until the
symbol
or flashes in the dis-
play.
2.
Press + or - to set the minutes.
3.
Press to confirm.
4.
Press + or - to set the hour.
5.
Press to confirm.
6.
When the set time ends, the symbol
or and the set time flash. The
acoustic signal sounds for two mi-
nutes. The appliance deactivates.
Press a button or open the appliance
door to stop the signal.
If you press while setting the
time for Duration
, the appli-
ance switches to setting the End
function.
6.2 Setting the Minute Minder
Use it to set a countdown time. The maxi-
mum time you can set is 23 hours 59 mi-
nutes. This function has no effect on the
operation of the oven. You can set the Mi-
nute Minder at any time, also if the appli-
ance is off.
1.
Press . and 00 flash in the dis-
play.
2.
Press + or - to set the Minute Minder.
At first the time is calculated in mi-
nutes and seconds. When the time
you set is longer than 60 minutes, the
symbol
comes on in the display.
The appliance then calculates the
time in hours and minutes.
3.
The Minute Minder starts automatical-
ly after five seconds.
After 90% of the set time, an
acoustic signal sounds. Press a
button to stop the signal.
4.
When the set time ends, the acoustic
signal sounds for two minutes. 00:00
and
flash in the display. Press a
button to stop the signal.
If you set the Minute Minder when
the Duration or End function oper-
ates, the symbol
comes on in
the display.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
hold + and -. The timer starts to count up
again.
You cannot use the Count Up
Timer when the Duration
or
End
function operates.
10
www.electrolux.com
Downloaded from www.vandenborre.be