User manual

5.3 Fast heat up function
The fast heat up function decreases the
heat up time.
1.
Set the fast heat up function. Refer to
the Oven functions table.
2.
Turn the knob for the temperature
/ to set the temperature.
3.
An acoustic signal sounds when the
appliance is at the set temperature.
The fast heat up function does not
deactivate after the acoustic sig-
nal. You must deactivate the func-
tion manually.
4.
Set an oven function.
5.4 Display
1
Timer
2
Heat-up and residual heat indicator
3
Water tank (selected models only)
4
Core temperature sensor (selected
models only)
5
Door lock (selected models only)
6
Hours / minutes
7
Clock functions
17 2 3
4567
5.5 Buttons
Button Function Description
Clock To set a clock function.
,
Minus, plus To set the time.
Minute Minder To set the Minute Minder. Hold this button for
more than 3 seconds to activate or deactivate the
oven lamp.
Temperature To check the oven temperature or the core tem-
perature of the food probe (if applicable). Use only
while an oven function is in operation.
5.6 Heat-up and residual heat
indicator
When you activate an oven function, the
bars in the display
come on one by
one. The bars show that the oven temper-
ature increases or decreases.
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more
than 40 °C. Turn the temperature knob
left or right to show the oven temperature
on the display.
6. CLOCK FUNCTIONS
Sym-
bol
Function Description
Minute Minder To set a countdown time.
ENGLISH 9
Downloaded from www.vandenborre.be