User manual

52
Perform pyrolytic cleaning
1 Warning: The oven gets very hot during this
process. Keep small children away.
1 Important Before carrying out pyrolytic clean-
ing, all removable parts must be taken out of
oven, including the slide-in grid.
3 If you use the oven shelf runners that are
available as special accessories, these must
be removed before pyrolytic cleaning.
Perform pyrolytic cleaning
1. First remove the worst of the residue manually.
2. Select oven function PYROLUXE .
– In the oven function display you will see PYRO-
LYSE NORMAL,
– In the time display will flash ”02:45”.
– the switch-off time will appear in the end display.
– The arrow for Cook time flashes for approx.
5seconds.
Pyrolytic cleaning then starts.
3 The oven light is not operating.
When the temperature set is reached, the door
is locked.
The key symbol is activated until the door is
released.
Changing the length of the Pyroluxe
1. Proceed as described under ‘Perform pyrolytic
cleaning’.
2. As long as the arrow for Cook time flashes, you
can use the / buttons to select the required
duration for pyrolysis:
– ”PYROLYSE ECO / 2:15“ or
– ”PYROLYSE INTENSE / 3:15”.
The arrow for Cook time flashes for approx.
5seconds.
Pyrolytic cleaning then starts.
3 If the arrow for Cook time stops flashing,
press the selection button Clock Functions T
repeatedly until the arrow for Cook time
flashes again and then you can carry out the
setting.
Changing the Pyroluxe switch-off time
The pyrolysis switch-off time can be delayed with the
clock function End time .
When are the different pyroluxes set:
– PYROLYSE ECO for low level of residue,
– PYROLYSE NORMAL for normal residue,
– PYROLYSE INTENSE for high level of residue.