User manual

58
What to do if …
If you are unable to remedy the problem by fol-
lowing the above suggestions, please contact
your dealer or the Customer Care Department.
1 Warning! Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3 If the appliance has been wrongly operated,
the visit from the customer service technician
or dealer may not take place free of charge,
even during the warranty period.
3 Advice on cookers with metal
fronts:
Because of the cold surface at the front of the
cooker, opening the oven door during (or just
after) baking or roasting may cause the glass
to steam up.
Problem Possible cause Remedy
The oven does not heat up The oven has not been switched on Switch the oven on
The clock has not been set Set the current time on the clock
The required settings have not been
set
Check the settings
Oven safety cut-out has been trig-
gered
See Oven Safety Cut-out
The house wiring fuse (in the fuse
box) has tripped
Check fuse If the fuses trip several
times, please call a qualified electri-
cian
“F 9“ appears in the display. Press the On/Off button.
The oven does not heat up and
the function display is in opera-
tion. A small arrow is illuminat-
ed.
Turn the oven function to OFF. Do not
switch off the oven.
Hold down the three central buttons
at the same time until a signal
sounds.
The oven light is not operating. The oven light is broken. Change the oven light.
The rotary spit does not turn. The wrong oven function has been
set.
Select the oven function with rotary
spin.
The rotary spit is not inserted correct-
ly.
Push the rotary spit in as far as the
stop.