User manual

electrolux 23
3 Within a few minutes a provisional end
time at which the set core temperature
will be reached is calculated. This time is
constantly recalculated and updated in
the display. The system requires that the
Meatprobe is pushed into the meat and
into the socket at the beginning of the
cooking process and that it is not re-
moved during the cooking process.
As soon as the pre-set core temperature is
reached, a signal sounds.
8. Press any key to switch off the signal.
3 The Meatprobe can also be set, if an
oven function has already been select-
ed.
To subsequently change the core tem-
perature, press key.
3 The core temperature is displayed from
30°C.
Removing the meat probe
1 Warning: The meat probe is very hot.
There is a risk of being burned when re-
moving the plug and the tip of the meat
probe.
1. Remove the meat probe’s plug from the
socket and take the meat out of the ov-
en.
2. Switch off the appliance.
Mechanical door lock
When the appliance is delivered the door
lock is deactivated.
Activating door lock
1. Take hold of the door trim(B) on the up-
per edge of the door at both sides and
press inwards to release the clip seal.
Then remove the door trim by pulling it
upwards.
2. Activate lever:
Remove lever (1) and
move 4mm to the left (2)
and insert (3).