User manual

7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func‐
tion
Application
TIME OF
DAY
To show or change the
time of day. You can
change the time of day
only when the oven is
off.
DURATION
To set how long the
oven works. Use only
when a heating function
is set.
END
To set when the oven
turns off. Use only when
a heating function is set.
TIME DELAY
Combination of DURA‐
TION and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has
no effect on the opera‐
tion of the oven. You
can set the MINUTE
MINDER at any time, al‐
so if the oven is off.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and
"12:00". "12" flashes.
1. Turn the knob for the temperature to
set the hours.
2. Press to confirm and set the
minutes.
The display shows
and the set
hour. "00" flashes.
3. Turn the knob for the temperature to
set the current minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
7.3 Setting the DURATION
function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Turn the knob for the temperature to
set the minutes and press to
confirm. Turn the knob for the
temperature to set the hours and
press
to confirm.
When the set Duration time ends the
signal sounds for 2 minutes.
and
time setting flash in the display. The
oven turns off automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.4 Setting the END function
1. Set a heating function.
2. Press again and again until
starts to flash.
3. Turn the knob for the temperature to
set the hours and press to
confirm. Turn the knob for the
temperature to set the minutes and
press to confirm.
At the set End time the signal sounds for
2 minutes.
and time setting flash in
the display. The oven turns off
automatically.
4. Press any button or open the oven
door to stop the signal.
5. Turn the knob for the heating
functions to the off position.
7.5 Setting the TIME DELAY
function
1. Set a heating function.
2. Press again and again until
starts to flash.
www.electrolux.com12