User manual

11.1 What to do if...
Problem Possible cause Remedy
The oven does not heat
up.
The oven is deactivated. Activate the oven.
The oven does not heat
up.
The fuse is blown. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
The oven does not oper‐
ate.
The automatic ignition
does not work.
Ignite the burner manually
with a long match. Hold the
flame near the hole in the
bottom of the oven cavity.
At the same time push the
knob for the gas control
and turn it counterclock‐
wise to the maximum tem‐
perature. When the flame
comes on, keep the knob
for the gas control pushed
for 15 seconds or less to
let the thermocouple warm
up. If not, the gas flow is
interrupted.
The lamp does not oper‐
ate.
The lamp is defective. Replace the lamp.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
The flame extinguishes im‐
mediately after ignition.
Thermocouple is not heat‐
ed up sufficiently.
After lightning the flame,
keep the knob for the gas
control pushed for 15 sec‐
onds or less.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
ENGLISH 19