User manual

Problem Possible cause Remedy
The oven does not heat
up.
The appliance is deacti-
vated.
Activate the appliance.
The oven does not heat
up.
The clock is not set. Set the clock.
The oven does not heat
up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The oven does not heat
up.
The fuse in the fuse box
is released.
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate.
The oven lamp is defec-
tive.
Replace the oven lamp.
The display shows 12.00. There was a power cut. Set the clock.
Steam and condensation
settle on the food and in
the oven.
You left the dish in the
oven for too long
Do not keep the dishes in
the oven for longer than
15 - 20 minutes after the
cooking ends.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
12. INSTALLATION
WARNING!
Refer to the Safety chapters.
12.1 Building Under
WARNING!
Only a qualified and competent
person must do the installation of
the appliance. If you do not con-
tact a qualified or competent per-
son, the guarantee becomes inva-
lid if there is damage.
• Before you install the appliance, fit it
with the applicable hob from the table.
Type Maximum power
EHA6040 6500 W
Type Maximum power
EHA6046 7600 W
EHA6041 6400 W
EHS6040 7000 W
12.2 Electrical connection with
the hob
The hob connection socket is at the top
of the oven cabinet. The hob has connec-
tion leads for the cooking zones and the
ground cable. The leads have plug-in
connectors. To connect the hob to the
oven, plug the connectors into the correct
oven sockets. The design of the plugs
ENGLISH 23