User manual

6.5 Changing the temperature
Touch or to change the
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.6 Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch .
The Temperature / Time display shows the
temperature in the appliance.
2. Touch to go back to the set
temperature or the display shows it
automatically after five seconds.
6.7 Fast heat up function
Do not put food in the oven when the Fast
heat up function operates.
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if Faulty
tone is activated in the "Settings menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold
for more than three
seconds.
If you activate the Fast heat up function,
horizontal bars on the display flash to
show that the function operates.
6.8 Energy saving
The appliance contains features which
help you save energy during everyday
cooking:
• Residual heat
– When an oven function or
programme operates, the heating
elements are deactivated 10%
earlier (the lamp and fan continue
to operate). For this feature to
operate, the cooking time must be
longer than 30 minutes or you
must use the clock functions
(Duration, End, Time delay). This
feature does not operate with grill
functions.
– When the appliance is off, you can
use the heat to keep the food
warm. The clock / residual heat
display shows the remaining
temperature, and the bars show
the temperature as it decreases.
• Cooking with the lamp off - Touch
to deactivate the lamp during
cooking.
• Eco functions - refer to "Oven
functions".
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
TIME OF DAY To show the time of day. To change the time of day,
refer to "Setting the time".
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use
Duration and End at the same time (Time delay) if you
want the appliance to activate and deactivate automat-
ically later.
ENGLISH
11