User manual

4.2 Display
B C D
EF
A
A) Top / Main oven indicator
B) Oven function symbol
C) Number of the oven function / programme
D) Indicators for the clock functions (refer to
the table "Clock functions")
E) Clock / residual heat display
F) Temperature / time of day display
Other indicators of the display:
Symbol Name Description
/
h / min
A clock function operates.
Heat-up / residual heat indi-
cator
Shows the temperature level in the appli-
ance.
Temperature / fast heat up
The function operates.
Temperature
You can examine or change the temper-
ature.
Minute minder
The minute minder function operates.
4.3 Heat up indicator
If you activate an oven function, the bars
come on in the display. The bars
show that the temperature in the
appliance increases or decreases.
When the appliance is at the set
temperature, the bars go off the display.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
1. Clean the appliance before first use.
2. Put the accessories and the
removable shelf supports back to their
initial position.
5.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few seconds
the display shows the software version.
After the software version goes off, the
display shows h and 12:00.
1. Touch or to set the hours.
2. Touch .
3. Touch or to set the minutes.
4. Touch
or .
The Temperature / Time display shows the
new time.
www.electrolux.com8