User Manual

9 ENGLISH
1. / BUTTON
Pressthebuttontoincrease/decrease
thetemperature.Keepthebutton
pressed for two seconds to accelerate
the process.
Temperaturerange:17-30°C(62-86°F).
Temperaturerange(UAEonly):20-28°C
(68-82 °F).
InTimerfunction,usethebuttontoset
thetimeradjustment.
2. FAN BUTTON
Pressthebuttontosetthefanspeed:
AUTO,LOW,MEDIUMandHIGH.
Defaultsetting:AUTO.IntheAUTOand
DRYmode,fanspeedcannotbeset.
$872
$872
+,*+
/2:
0(',80
3. (SWINGUP/DOWN)
BUTTON
Pressthisbuttontostoporstart
horizontallouvermovementorsetthe
desiredup/downairflowdirection.
3
1
. SWINGBUTTON
Pressthebuttontostoporstart
horizontallouverautoswingfeature.
Defaultsetting:OFF.
4. (SWINGLEFT/RIGHT)
BUTTON
Pressthisbuttontostoporstartvertical
louvermovementorsetthedesiredleft/
rightairflowdirection.
• ForthemodelswithoutSwing
Left/Rightfunction,thereisno
feedbackreceivedbytheindoor
unitwhenyoupressthebutton.
4
2
. DIRECT BUTTON
Pressthebuttontostoporstart
horizontallouvermovementorsetthe
desiredup/downairflowdirection.The
louverchangesangleforeachpress.
5. FOLLOWMEBUTTON
Pressthebuttontoenableordisable
theFollowmefunction.IftheFollow
mefunctionisenabled,theFollowme
symbol” ”willbeshown.
6. SELFCLEANBUTTON
PressthebuttontoenabletheSelfclean
function.Defaultsetting:OFF.
7. SHORTCUTBUTTON
PressthebuttontoenableShortcut
function.
Seesection“Howtousetheremote
controller“fortheShortcutfunction
description in details.
7
3
. ION BUTTON
PressthebuttontoenabletheIon
function.Defaultsetting:OFF.
8. TURBO BUTTON
InCOOLorHEATmode,pressthe
buttontoenableordisabletheturbo
function.
Iftheturbofunctionisenabled,theunit
willoperateatturbospeedtocoolorheat
rapidlysothattheambienttemperature
approachesthesettemperatureassoon
aspossible.
9. LEDBUTTON
Pressthebuttontoswitchthedisplayof
theindoorunitonoro󰘯.Defaultsetting:
ON.
10. SLEEPBUTTON
Pressthebuttontoenableordisable
Sleepfunction.IftheSleepfunctionis
enabled,theSleepsymbol” ”willbe
shown.Defaultsetting:OFF.
11. TIMER BUTTON
Pressthebuttontosetthetimerfunction
forswitchingon/o󰘯theunit.
Seesection“Howtousetheremote
controller“fortheTimerfunction
description in details.
12. ON/OFF BUTTON
Pressthebuttontoswitchonoro󰘯the
unit.
13. MODE BUTTON
Pressthebuttontosettheoperation
mode:AUTO,COOL,DRY,HEATand
FAN.Defaultsetting:AUTO.
$872 +($7&22/ )$1'5<