Specification

3
Attach front mounting brackets
Attach rear mounting brackets
DRAWER
Attach each front bracket to outer-1.
most set of holes with 2 screws.
Determine your appliance type (washer or dryer) according to column 1.
1 in table below.
Orient rear brackets according to column 2 for your particular model.2.
Attach each bracket with 2 screws through the holes that line up on 3.
pedestal.
Front brackets
from kit.
1 - Appliance 2 - Rear bracket orientation
DRYER
Tab A into•
Slot 1•
Arrow pointing to back•
WASHER
Tab A into•
Slot 1•
Arrow pointing to front•
TAB A
TAB B
Each rear bracket has tabs marked “A” and “B”.•
Each pedestal has slots in the rear marked “1”, “2” •
and “3”.
Each rear bracket also has 2 arrows indicating •
bracket direction when mounted on the pedestal.
SLOT 1
SLOT 2
SLOT 3
DIRECTION
INDICATOR
ARROWS