User Guide

11
EN
IMPORTANT
For bottom mount refrigerators (where
freezer is below the fresh food
compartment):
Ensure all freezer drawers and shelves are
pushed back completely to prevent them from
keeping the door open.
WARNING
LED lighting
Your appliance is fitted with long life LED
lighting. In the unlikely event the LED
lights should fail, then the LED lights
should be serviced by the service agent,
to avoid a safety hazard. Refer to the
warranty page for contact details.
5.1 REMOVING FEATURES
Crisper Bin
Removal (standard Crisper Bins):
1. Empty food from the crisper. On some
models it will be necessary to remove the
bottle storage bins.
2. Remove the crisper bin(s) by pulling
forward, then up and forward again.
3. For top mount and single door, remove
the crisper shelf by lifting the catches on
the left and right underside of the shelf
and pulling the shelf forward.
SpillSafe™ glass shelves
To remove the shelves, gently pull them forward
until the shelf comes clear of the shelf guides.
To return the shelf, make sure there is nothing
behind that may obstruct movement. Gently
push the shelf, into the cabinet and back into
position.
Drawers fit ed with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward
and lifting the front to unhook it from the
slides. Once you have removed the
drawer, ensure the slides are pushed back
so they are fully closed.
Twist and Serve Ice
Mounting the twist & serve dispenser to the
other side of the freezer.
NOTE: this is only possible on Top mount
models.
1. Remove the ice bin and ice cube tray. If
the ice tray assembly is frozen to carriage,
simply squeeze the tray and shelf together
to break the ice.
2. Before you remove the ice carriage,
remember to disengage it from the glass
shelf as it may result in damage to the
assembly.
Insert into the slot at
the rear of the shelf
Then engage into the
front of the shelf
Insert into the slot at
the rear of the shelf
Then engage into the
front of the shelf
Insert into the slot at
the rear of the shelf
Then engage into the
front of the shelf
Insert into the slot at
the rear of the shelf
Then engage into the
front of the shelf