User manual

21
Door reversibility
Unplug the refrigerator from the wall socket before
performing the following operations:
Remove the lower hinge (1) and the support foot (2).
Unscrew the front left support foot (3) and screw it into
the corresponding position on the opposite side.
Unscrew the two screws which hide the fixing holes of
the hinge on the left-hand side.
Detach the lower door from the central hinge (H).
Remove the central hinge and detach the upper door
from the pin (5). Unscrew the pin (5) and screw it into
the corresponding position on the opposite side.
Remove the two plugs, to reveal the holes for the
hinge pivots, and remount them on the other side.
Re-assemble the lower hinge (1) and the support foot
(2) on the opposite side.
Unscrew the handle. Refit it on the opposite side after
having pierced the plugs with a punch. Cover the
holes left open with the plugs contained in the docu-
mentation pack.
Attention
After completion of the door reversibility operation,
verify that the door gasket is adherent to the cabinet.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or accel-
erate this process by heating up the part involved with
a normal hairdrier.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
5
D548
D405
H
PR228
D715
1
2
3