User manual

Push appliance into the housing until stop strip (A)

touches the kitchen unit.

If after having carried out the previously described

operation there is still some space left between the

appliance and the kitchen unit, fit the trimming

provided together with the appliance on the stop

strip (A).

Open the door and push the appliance against the

side of the kitchen unit opposite to that of appliance

hinges.

Fasten the appliance with 4 screws provided in the

kit included with the appliance. Snap vent grille (C)

and hinge cover (D) into position.

Press in the joint covers between the appliance and

the kitchen unit.

D724

D023

D723

D265