fridge-freezer / frigorífico / congélador INSTRUCTION BOOKLET INSTRUCCIONES DE USO INSTRUÇÕNES DE USO ER8312B, ER8412B, ER8912B, ER8913B, ER9012B, ER9013B GB ES PO 818 16 05--01/8 1
Safety instructions GB Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are insure about any of the meanings or warnings contact the Customer Care Department.
Description of the Appliance Model ER8912B, ER8913B 4 1 2 6 1 6 5 7 5 1 3 3 2 8 11 9 9 GB 12 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Glass shelf Bottle shelf Vegetable drawer Butter compartment Door shelf Egg holder Sliding shelf Freezer plate Freezer drawer Ventilation grille Freezer calendar Rectractable shelf 9 10 1 -----------------------------2 Model ER8312B 4 6 6 5 1 -----------------------------1 7 3 3 8 11 9 9 12 9 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Model ER9012B, ER9013B 4 1 2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 9 1 10 10 1 9 1 9 3 3 3 11 3 6 8 Glass shelf Bottle shelf Vegetable drawer Butter compartment Freezer plate Freezer drawer Ventilation grille Freezer calendar Door shelf Egg holder Bottle shelf 5 6 6 7 Model ER8412B 4 1 2 5 6 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Control Panel 5 A B C DE * -- 18 ACTION COOL F G ACTION FREEZE H I J K L A. Refrigerator power switch Switches the refrigerator on and off. G. Temperature display Shows the highest temperature inside the freezer. B. Temperature display Shows the average temperature inside the refrigerator. H. Temperature adjustment buttons/thermostat Used to set the temperature in the freezer. I. FAST FREEZE button Used to switch the fast Freeze feature on and off. C.
Setting the temperature Press the buttons until the desired temperature flashes in the temperature display (The temperature can be set between +1°C and +9°C.) "+" raises the temperature. "-" lowers the temperature. A setting of 5°C is usually suitable for normal operation. Once set, the temperature display shows "-" until the temperature inside the fridge reaches +9°C or below. Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed.
Switching off Switch off the cabinet by pressing the power switch. Keep the button pressed for approx. 1 second. Power to the cabinet is completely interrupted only when the power plug is disconnected or the fuse is removed. 5 - 18 5 - 18 A - 18 Alarms and other features Door open alarm If the fridgedoor remains open for more than 5 minutes, the red warning lamp starts flashing and an audible alarm sounds. To switch off the alarm: Press the "alarm shut-off button".
Using the freezer GB To start the freezer and set the correct temperature Switching on: Switch on the freezer by pressing the power switch. The alarm sounds if the temperature inside the freezer reaches room temperature. Turn off the alarm by pressing the switch-off button. Setting the temperature: Press the buttons until the desired temperature blinks on the temperature display. (The temperature can be set between -15°C and -24°C.) "+" increases the temperature. "-" decreases the temperature.
Temperature alarm If the temperature rises above -12°C, the red warning lamp flashes and an audible alarm sounds. The temperature display will then start to flash. To switch off the alarm: Press the alarm shut-off button to switch off the audible alarm. The temperature display will stop flashing. The red warning lamp goes out when the temperature inside the freezer again falls below -11°C. Find out what caused the alarm. See the chapter "Something not working".
Practical advice on freezing · When freezing products, use the top shelf, and if necessary the shelf beneth that. · Place the foods directly on the freezer shelves. · Spread out the products as much as possible to allow air to circulate between them. · Do not place food products which are to be frozen directly against other frozen food. The heat from the unfrozen food may cause the frozen food to thaw on the surface. · Once frozen, re-arrange the products and put them as close as possible to each other.
Ice cubes Fill the ice tray to max. 3/4 since water expands as it freezes. Release the ice cubes by twisting the ice tray. If ice cubes are kept for a long time, they will dry out and the taste is affected. Thus, throw away old ice cubes and prepare new ones when needed. Model ER8312B, ER8912B, ER8913B Removeable shelf There is a middle shelf inside the freezer. Remove the shelf when large food products need to be frozen.
Maintenance and Cleaning GB Removing the ventilation grille The ventilation grille can be removed, e.g. to wash the grille. Make sure the door is open when removing the ventilation grille. Unsnap the upper edge of the grille by pulling outward/downward. Then pull the grille straight out to completely remove it. Modell ER8913B, ER9013B Unsnap the ventilation grille by pulling it toward you. Cleaning Clean the cabinet at regular intervals.
Defrosting the freezer A certain amount of frost will always form on the freezer shelves and around the top compartment. Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm. Remove the freezer drawers and place them on top of each other by turning every other drawer one half turn. Put insulating material around the drawers, e.g. blankets or newspapers. The frozen products can also be packed closely together and be kept in a cold location, e.g. in the fridge.
Audible alarm + flashing red warning lamp. (It is too warm inside the freezer.) Switch off the audible alarm by pressing the alarm shut-off button. The audible alarm could have been triggered by: The cabinet having been recently switched on and the temperature still being too high. See the chapter "Switching on and setting the temperature". The door may have been open for so long that the `door open' alarm was triggered. It is too warm inside the refrigerator. Set a lower temperature.
The cabinet does not operate at all. Cooling or interior light does not operate. No indicator lamps light. The power plug is not properly connected. The fuse has blown. The cabinet is not switched on. Power does not reach the cabinet. (Try connecting another electrical device to the power outlet.) Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A pulsing sound is heard when coolant is pumped inside the cooling pipes.
Technical specification GB Model ER8412B ER8312B ER9012B Volume fridge Volume freezer 240 l 85 l 188 l 127 l 297 l 85 l Width 595 mm 595 mm 595 mm Height 1800 mm 1800 mm 2000 mm Depth 600 mm 600 mm 600 mm Energy consumption 460 kWh/year 475 kWh/year 496 kWh/year Energy class B B B Rated power 160W 160W 160W Weight 83 kg 83 kg 91 kg Freezing capacity 12kg/24 hours 12kg/24 hours 12kg/24 hours Number of compressors 2 2 2 Model ER8912B ER8913B ER9013B Volume fri
Remove the transport supports Remove the tape and the transport supports from · the door sides · inside the door hinges · the shelves Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops at the protuberance of the shelf. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the cabinet.
1 Door Reversal Modell ER8913B, ER9013B 1. Close the cabinet and pull out the plug from the electrical outlet. 2 2. Remove the ventilation grille. There is a part on the grille that can be removed. Remove it and put it on the other side. 3 3. Put the cabinet on a wooden board when it is laid down. Later, when raising the cabinet, it will be easier to grip under the cabinet thanks to the board. 4 4. Unscrew the lower hinge and remove the lower door.
Door Reversal 1 Model ER8312B, ER8412B, ER8912B, ER9012B 1. Close the cabinet and pull out the plug from the electrical outlet. 2 2. Remove the ventilation grille. There is a part on the grille that can be removed. Remove it and put it on the other side. 3 3. Put the cabinet on a wooden board when it is laid down. Later, when raising the cabinet, it will be easier to grip under the cabinet thanks to the board. 4 4. Unscrew the lower hinge and remove the lower door.
MARIESTAD DD--AV