User manual

Electrolux 818 19 23-02/3

Door Reversal

1. Close the cabinet and remove the plug from the

electrical socket.

2. Unscrew the handle. Firstly unscrew the handle

attachment from the upper handle holder. Then loosen

both handle holders from the door.

3. Remove the ventilation grille. There is a part on

the grille that can be removed. Remove and

reposition i t on the other side.

4. Put the cabinet on a wooden board when it is laid

down. Later, when raising the cabinet, it will be

easier to grip under the cabinet thanks to the board.

5. Unscrew the lower hinge and remove the lower

door. Unscrew the upper hinge pin and remove the

upper door.

6. On the centre beam:

Remove the plastic plugs by driving a drift into them

and rocking them loose.

Move the centre hinge unit to the other side. Flatten

the threads in t he holes remaining from the hinges

and insert new plastic plugs.

7. Unscrew the cover washer on top of the cabinet

and move it to the other side. Replace the upper door

and secure the upper hinge pin.

Replace the lower door. Change the position of the

hinge pin of the lower hinge. Then secure the hinge.

Remove any play in the door by adjusting the height

of the l ower hinge with the supplied spanner. Secure

with the lock-nut.

8. Fasten the handle. Follow t he instructions in section

"Installation -mounting of handle"

9. Raise the cabinet and replace the ventilation grille.

10. Put the cabinet in position. Check that the

appliance is level. See the section "Positioning the

cabinet".

Electrical connection

Connect the cabinet to a grounded electrical outlet.

Voltage: 230 V.

Fuse: 10 A.

Refer to the rating plate on the left inside the

cabinet.