User manual

Electrolux 818 33 95-02/2

Unpacking

Unpack the cabinet and check that it is in good

condition and free of any transport damage. Notify

the dealer immediately of any damage. Hand the

packaging over for recycling. For more i nformation,

contact your local city office or the dealer.

Do not allow children t o play with the

packaging. The plastic film can cause

suffocation.

Remove the transport support s

Remove the tape and the transport supports from

· the door sides

· inside the door hinges

· the shelves

Remove the transport support on the glass shelf by

pushing the support forward along the edge of the

shelf until it stops. Take hold of the rear edge of the

glass shelf and pull the shelf and transport support

forward until the shelf tilts and the transport support

can be removed. Some models are fitted with a

silencing pad under the cabinet. Do not remove this

pad.

Cleaning

Wash the inside of the cabinet using lukewarm

water, a mild washing-up detergent and a soft cloth.

Mounting the handles.

Pool handle

1. Screw a handle attachment onto the handle bar.

2. Screw the other handle attachment on the cabinet

door.

3. Put the handle with the handle attachment on the

door and screw into place.

Caution! Do not overtighten the screws (max 2 Nm) as

you may damage the door handles.