User manual

7
Prior to undertaking any maintenance operation,
be sure to unplug the appliance.
Defrosting of the freezer
The inner walls of the freezer become gradually
covered with a layer of frost keeping in mind not to
open the door frequently and keeping the food wrap-
ped up in closed bags.
Whenever the thickness of ice reaches 5 mm. the
frost should be removed. Here to proceed as follows:
1... Remove all food staffand place it in the coolest
possible place..
2 Place the Plastic Scraper (supplied with the
appliance) into the existing slot above the plinth
See Fig.8).
3 Place a bowl under the outlet to collect the water.
4 Pull out the drawers and the upper tray.
5 Under no circumstances should you try and tear
off the ice formed, wait for it to melt away.
6 Once the ice is eliminated and the appliance is
clean and dry, remove the plastic scraper and
replace the drawers and the upper tray.
7 Plug in the appliance.
Defrosting of the refrigerator
Frost is automatically eliminated in the refrigerator.
Clean regularly the water drain opening «G».
Cleaning
 Do not use alcohol or any cleanig product contai-
ning alcohol because it can damage the cabinet.
 Use lukewarm water and neutral soap or bicarbo-
nate of soda for cleaning the interior and the exte-
rior of the appliance. Never use detergents nor
abrasive powders.
 Clean the black grill on the read of the appliance
(condeser), motor and the upper and downer venti-
lation slots with a brush or vacuum cleaner. This
way the performance of the appliance will improve
and energy consumption reduced.
 Clean the water container above the motor.
 Extract the base pulling it outwards in order to per-
mit cleaning undermeath the appliance.
Idle periods
During periods when the appliance is not in use take
the following precautions:
 Unplug the appliance.
 Remove all the food.
 Defrost and clean the interior and all accessories.
 Leave the door ajar to permit the air to circulate in
the interior and thus avoid unpleasant smells.
Maintenance
D068
Fig. 8