User manual

21
7. Remove the two cover lids on the
roof
8. Un screw the two screws on the
hinge
9. Remove the cover on the front
Reassembly in reverse order on the
opposite side.
Raise the cabinet an d replace the
ventilation grille.
10. To transfer the handle.
Unscrew the screws. Fit the handle
onto the opposite side by turning it
one h alf circle. Press the supplied
plastic plugs into the holes to which
the h an dle was previously fitted.
Put the cabinet in position. Check that
the appliance is level. See the section
"Positioning the cabinet".
Electrical connection
Connect the cabinet to a grounded
electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left
inside the cabinet.
7
8
9
10