User manual

7.11 Installation of the gas cylinder
• Remove the gas cylinder wrapping and
screw on the adapter to the gas cylin-
der. Tighten by hand only.
1
2
• Position the gas cylinder with the
adapter attached underneath the valve
and ensure that the hooks of the lever
system supports the protruding parts of
the adapter.
3
4
• Then turn the lever upwards in one
continuous movement.
7.12 Door reversibility
In case you want to change the opening
direction of the door, contact the nearest
After Sales Service Force. The After Sales
Service specialist will carry out the reversi-
bility of the doors at your cost.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
ENGLISH 41