User Manual

9
INSTALLATION
Adjusting Flipper Mullion Screw
2. Adjust flipper mullion height. For proper
connection with the flipper mullion
guide, there should be a separation
about the thickness of a coin (0.060
inches, or 1.5 mm) between the guide
and flipper mullion.
3. Re-tighten screws.
To adjust the flipper mullion:
1. Loosen the two screws located on the
flipper mullion hinge.
Adjusting Flipper Mullion Height
Flipper
Mullion
Screws
Flipper Mullion
Adjust the Flipper Mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded and
perpendicular to the refrigerator door. If the
mullion guide is not in the correct position,
it could prevent the door from closing
completely.
WRONG
Flipper
Mullion
Mullion
Guide
Thickness
of a Coin