Owners Manual

18
WATER SUPPLY CONNECTION
5. With the steel clamp and screw, secure
the water supply line (copper tubing
only) to the rear panel of refrigerator
as shown.
6. Coil the excess water supply line
(copper tubing only), about 2½ turns,
behind refrigerator as shown and
arrange coils so they do not vibrate or
wear against any other surface.
7. Turn ON the water supply at shutoff
valve and tighten any connections
that leak.
8. Reconnect the appliance to electrical
power source.
9. To turn the ice maker on, ensure Ice
Maker is enabled on the appliance
control display (LED will be lit) or set
the ice maker’s on/off power switch to
ON (freezer ice maker).

NOTE
These instructions do not cover after
market ice maker installation. Use after
market ice maker kit instructions.