Owners Manual

19
CONTROLS AND SETTINGS
1
Change
Temperature
Select the Freezer or Refrigerator icon to
change the temperature.
Press +/ buttons to set the temperature
Freezer
control range:
-6˚F/-21˚C to
6˚F/-15˚C
Refrigerator
control range:
34˚F/1˚C to
44˚F/7˚C
2
Clear Alerts Resets any active alarms illuminated on
the appliance control display (DOOR
OPEN, HIGH TEMP, POWER OUTAGE).
3
Freeze Boost Prior to grocery shopping, activate
Freeze Boost so newly purchased
food designated for the freezer will be
preserved as quickly as possible. Freeze
Boost will remain active for up to 24 hours
before automatically deactivating or
manually exiting by pressing Freeze Boost
to turn the function off. This will reset the
freezer to the previous temperature setting.
4
F/C Touch to toggle the display from
Fahrenheit to Celsius.
5
Water
Dispenser
Press and hold for 3 seconds to turn
off and on. When the water dispenser
is turned on the LEDs above Water
Dispenser will illuminate.
6
Default
Settings
Press and hold for 3 seconds to reset to
factory settings.
7
Water Filter Press and hold for 3 seconds to reset status
after you replace the filter. The status shown
at right of button will reset to GOOD.
8
Air Filters Press and hold for 3 seconds to reset status
after you replace the filter. The status shown
at right of button will reset to GOOD.
1
2
3
5
7
8
4

NOTE
The recommended settings for a product installed in a kitchen
are 37˚F for the refrigerator compartment and 0˚F for the freezer.
Setting cooling temperatures
Select the compartment where you want to change the temperature by pressing the Freezer
or Refrigerator buttons at the top of the appliance control display. Press the + or  buttons
to adjust the temperature to the desired setting.
The temperature setting will begin to blink with the first touch. The display will time out after
10 seconds and return to the basic display.
6
Internal Water Dispenser Appliance Control Display