User manual

70 electrolux
GB
Temperature Display
The temperature display can
indicate several pieces of
information.
During normal operation, the
temperature currently present in the
refrigerator (ACTUAL temperature) is
displayed.
When the temperature is being
adjusted, the temperature currently
set flashes (DESIRED temperature).
Prior to Initial Start-Up
Please clean the appliance interior and all
accessories prior to initial startup (see
section: "Cleaning and Care").
Starting up and temperature
regulation
1. Insert the plug into the plug socket.
When the refrigerator compartment
door is opened, the internal lighting is
switched on.
2. Press ON/OFF button. The green
mains pilot indicator illuminates.
3. Press either the "+" (WARMER) or "-"
(COLDER) button. The temperature
display switches over and the
DESIRED temperature currently set
flashes on the temperature display.
4. Set the required temperature by
pressing the "+" (WARMER) or "-"
(COLDER) buttons (see section
"Temperature setting buttons"). The
temperature display will immediately
show the changed setting. With each
further press of one of the two
buttons, the DESIRED temperature is
adjusted by 1°C. Adjustable
temperature range: +2°C to +8°C.
Note: From a food safety point of
view, +5°C for the refrigerator
compartment should be considered cold
enough as a storage temperature.
5. Once the required temperature has
been set, after a short period (approx.
5 sec.) the temperature display will
change and again indicate the current
ACTUAL temperature inside the fridge.
The display will change from flashing
to continuous illumination. The
compressor will start and then run
automatically.
Information! When the setting is
changed, the compressor does not start
immediately if automatic defrosting is
currently taking place.
As the storage temperature within
the fridge is reached quickly you
can store food immediately after
switching on.