User manual

• Fit the rear brackets, taking into account
the thickness of the panels (maximum
width of unit 900 mm).
• For a correct alignment make sure that
the distance between the appliance and
the cabinet is of 45 mm.
• Secure the panels at the front.
• Fix the squares (contained in the bag) to
the lower part of the door (references al-
ready provided).
• If necessary, door opening agle max 90°
can be obtained by introducing the pivots
supplied separately. See picture.
Fitting the door panels
• Open a door a remove the bracket cover.
Undo the nuts with washers and remove
the bracket from the door.
• Drill the small doors as shown in the fig-
ure.
4 Top right-hand front panel
5 Top left-hand front panel
6 Bottom right-hand front panel
7 Bottom left-hand front panel
• Fix the bracket to the door with the
screws contained in the bag.
electrolux 31