User manual
• Refit the bracket on the adjustment
screws and screw the nuts with washers
without tightening them down.
• Close the door and check that the small
door is positioned at the required height,
operating the adjustment screws if nec-
essary.
• Use the same screws for vertical align-
ment of the small doors.
• If necessary, carry our horizontal align-
ment by shifting the small doors.
• After aligning the doors, tighten the nuts
of the brackets and the screws of the
small bracket.
• Fix the bracket located under the door to
the panel with the two plastic washers
contained in the box of accessories.
• Then refit the bracket cover.
Building the appliance in
• Fit the appliance into the recess.
• Rotate the bracket of 180° in order to
obtain the right position ( 2). The position
(1) is on the delivery.
• Fix it to the wall with the appropriate
bracket.
32 electrolux