Complete Owner's Guide

10
Installation
Lower Hinge Removal
Once both doors are in place, ensure
they are aligned with each other and level
(Reference the Installation section for more
details), and replace the top hinge cover.
8 To reinstall doors, reverse procedure.
7 To gain access to lower hinge,
drawer will need to be extended.
Unscrew the three lower hinge
screws and slide the hinge inwards.
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to be sure the tube does not kink.
IMPORTANT
Make sure water line tubing goes
through hole at top of dispenser pocket.
There is also a metal wrap on the tubing
to prevent damage from the hinge
rubbing against it. This needs to be
fixed back around the tube in the proper
location upon reinstallation (just as long
as the tube is protected from the hinge).
Prevent doors from touching walls
If your refrigerator doors are touching
objects such as a wall or counter-top
located close to the side of the appliance,
the doorstop can be replaced with the
provided Optional Door Opening Angle
Feature located in your crisper drawer. This
is to reduce the maximum door opening
angle for both doors or one specific door.
Door Stop Default
Maximum Opening Angle: 123º
Optional Door Opening Angle Feature
Maximum Opening Angle: 105º
Optional Door Opening Angle Feature
NOTE
Optional Door Opening Angle Feature
Parts are identified:
LH - Left Hand, to apply on Left Door
RH - Right Hand, to apply on Right Door