User manual

19
4. Apply covers (B) on joint cover lugs and into hinge
holes.
D013
BB
5. Separate parts A, B, C, D as shown in the figure.
PR266
A
B
C
D
Dimensions of the recess
Height of housing mm 880
Depth of housing mm 550
Width of housing mm 560
1. Slide the appliance into the recess, pushing it
against the wall on the handle side.
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
screws provided in the kit included with the
appliance. Snap vent grille (C) and hinge cover (D)
into position.
Building-in
540
50
560
550
880
PR 32
2. Apply joint the sealing strip as shown in figure.
D132
A
D022
D727
C
D