User manual

6. Place guide (A) on the inside part of the furniture

door, up and down as shown in the figure and

mark the position of external holes. After having

drilled holes, fix the guide with the screws

supplied.

20mm

50mm

PR166

4. Apply covers (B) on joint cover lugs and into hinge

holes.

D013

5. Separate parts A, B, C, D as shown in the figure.

PR266

1. Slide the appliance into the recess, pushing it

against the wall on the handle side.

3. Open the door and push the appliance against the

side of the kitchen unit opposite to that of ap-

pliance hinges. Fasten the appliance with 4

screws provided in the kit included with the

appliance. Snap vent grille (C) and hinge cover (D)

into position.

2. Apply joint the sealing strip as shown in figure.

D132

D022

D727