User manual

7. Fix cover (C) on guide (A) until it clips into place.

8. Open the appliance door and the furniture door at

90¡. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with ¯ 2 mm

at 8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

PR33/2

8mm

PR167

9. Should the lining up of the furniture door be

necessary, use the clearance of slots. At the end

of operations, it is necessary to check if the door

of the furniture closes properly.

PR168

10. Fix cover (D) on guide (B) until it clips into place.

PR167/1