User manual

6. Place guide on the inside part of the furniture door,

up and down as shown in the figure and mark the

position of external holes. After having drilled

holes, fix the guide with the screws supplied.

21 m

ca. 50 mm

90°

ca. 50 mm

4. Snap vent grille (B) and hinge cover (E) into

position.

Apply covers (C-D) on joint cover lugs and into

hinge holes.

3. Open the door and push the appliance against the

side of the kitchen unit opposite to that of ap-

pliance hinges. Fasten the appliance with 4

screws (I) provided in the kit included with the

appliance.

5. Separate parts Ha, Hb, Hc, Hd as shown in the

figure.

PR266

D132

D022

1. Fit the appliance in the niche by making sure that

it stands against the interior surface of the unit on

the side where the door hinges of the appliances

are fitted. Insert the appliance until the upper strip

butts up against the unit (1) and make sure that

the lower hinge is in line with the surface of the

unit (2).

2. Apply joint the sealing strip as shown in figure.