User manual

25
Branchement Žlectrique
Contr™lez, avant de brancher lÕappareil, que le
voltage et la frŽquence indiquŽs sur la plaque
signalŽtique correspondent ˆ ceux de votre rŽseau.
TolŽrance admise: ±6%.
Pour lÕadaptation de lÕappareil ˆ des voltages
diffŽrents, lÕadjonction dÕun autotransformateur dÕune
puissance adŽquate est indispensable.
Il faut absolument brancher l'appareil ˆ une prise
de terre qui marche.
C'est pour cela que la prise du c‰ble d'alimentation
est munie d'un contact prŽvu expr•s. Si la prise de
courant du rŽseau domestique n'est pas branchŽe ˆ
la terre, branchez l'appareil ˆ une prise de terre ˆ
part, conformŽment aux normes en vigueur, en vous
adressant ˆ un technicien spŽcialisŽ.
Le fabricant dŽcline toute responsabilitŽ, si cette
norme de prŽvention des accidents n'est pas
respectŽe.
-Cet appareil est conforme aux Directives
Communautaires suivantes:
- 87/308 CEE du 2.6.87 concernant la
suppression des interfŽrences radio-Žlectriques
- 73/23 CEE 19/02/73 (Basse Tension) et
modifications successives;
- 89/336 CEE 03/05/89 (CompatibilitŽ Electro-
magnŽtique) et modifications successives.
INSTALLATION
Emplacement
Placez de prŽfŽrence votre appareil loin dÕune
source de chaleur (chauffage, cuisson ou rayons
solaires trop intenses).
Pour lÕencastrement rapportez - vous aux
instructions relatives ci-jointes.
Important:
LÕappareil doit pouvoir •tre dŽbranchŽ du secteur; il
est donc nŽcessaire que la fiche reste accessible
une fois que lÕinstallation est terminŽe.
INFORMATIONS TECHNIQUES
Classe ŽnergŽtique A
205
70
0,86
314
13
20
CapacitŽ nette en litres du rŽfrigŽrateur
Consommation dÕŽnergie en kWh/24h
Consommation dÕŽnergie en kWh/annŽe
Pouvoir de congŽlation en kg/24h
Autonomie, en cas de panne, heures
CapacitŽ nette en litres du congŽlateur
Tous les renseignements techniques sont indiquŽs sur la plaque signalŽtique qui se trouve sur le c™tŽ gauche
de lÕappareil.
28
CONTENTS
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Use - Cleaning the interior - Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Use - Operation - Movable shelves - Positioning the door shelves - Fresh food refrigeration . . . . . . . . . . . . .30
Use - Control Panel- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Use - Operation - Freezing fresh food - Storage of frozen food - Thawing -Ice-cube production . . . . . . . . . . .32
Hints - Hints for refrigeration - Hints for freezing - Hints for storage of frozen food . . . . . . . . . . . . . . . . . . . .33
Maintenance - Periods of no operation - Periodic cleaning - Interior light - Defrosting . . . . . . . . . . . . . . . .34
Customer service and spare parts - Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Installation - Location - Electrical connection - Dimensions of housing . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
¥ Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.
Installation
¥ During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the instructions.
Attention: keep ventilation openings clear of
obstruction.
¥ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly availa-
ble from the manufacturer or its service agent.
¥ If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to
wait at least two hours before connecting the
appliance to allow the oil to flow back in the
compressor.
¥ There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
¥ Parts which heat up should not be exposed.
Wherever possible the back of the product
should be against a wall.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol are recyclable.