Kühlschrank / refrigerator GEBRAUCHSANWEISUNGEN INSTRUCTION BOOKLET ERP 1672 D 2222 749-75 GB
t Safety Instructions Please read these operating instructions carefully before installing the appliance. These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. If you are unsure about the meaning of these warnings contact the Customer Care Department. Domestic Use ¥ The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.
These symbols guide you in the reading of these instructions for use: Notes which are important for your safety or for the proper functioning of the appliance Supplementary information regarding operation and practical applications of the appliance. Tips and notes concerning economical and environmentally sound use of the appliance. Use and Control Before Use ¥ To remove the internal shelf pull forward until it can be tipped up or down and removed.
Hints Saving Energy ¥ Pay careful attention to where the cabinet is placed. See the section ÒInstallationÓ. When installed correctly the cabinet will consume less energy. ¥ Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air will enter the cabinet and cause the compressor to switch on unnecessarily often.
Cleaning Changing the light bulb Never use metal objects for cleaning your appliance as it may get damaged. NEVER use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as these will damage the surface and leave a strong odour. Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly.
Customer service and spare parts If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department and consult the Guarantee card. Selective ordering of replacement parts can save unnecessary travel and costs. For this reason always provide the following appliance information: - Model Name - Model Number (PNC) - Serial Number (S-No.) This information can be found on the rating plate inside the cabenit on the left hand wall.
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used. This appliance complies with the following E.E.C. Directives: - 87/308 EEC of 2/6/87 relative to radio interference suppression. - 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications.
Building-in Dimensions of the recess The following installation steps are illustrated only when the door is hinged on the left, please carry out the following installation steps on the opposite side as appropriate. 1. Performing adjustments Aligning the furniture housing FAL1MERA 100 2. Cut joint cover fillets (E) 90° 90° MAU2ME Detaching the appliance door FAL2MERA 3. Apply joint cover fillets (E).
4. Fit ventilation grill (N) and push appliance into place 8. Apply door handle. PL09 PL13 5. Screw the appliance into place. 9. Inserting the appliance door. GF1MERA 6. Install screw-head caps (L) TE1MERA 10. Aligning the appliance door (where necessary). SAB1ME 7. Attach door panel.
923 632 667 ELECTROLUX HOME PRODUCTS OPERATIONS EUROPE