User manual

1. Apply the adhesive sealing strip to
the appliance as shown in figure.
x
x
2. Remove the red cover as shown in
figure .
3. Install the appliance in the niche.
4. Attach the appliance to the niche with
4 screws.
5. Fix the covers on the screws.
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.
8.6 Assembly instructions for
the compensator lower part of
the door
1. With the door open, loosen the two
screws situated in the lower part
without unscrewing them completely.
www.electrolux.com16