User manual

Problem Possible cause Possible solution
The salt container cap is not
closed correctly.
Make sure that the salt contain-
er cap is closed correctly.
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes.
The rinse aid quantity is too
high.
Decrease the rinse aid quantity.
Dry water drop stains on
glasses and dishes.
The rinse aid quantity is too
low.
Increase the rinse aid quantity.
The detergent can be the
cause.
Use a different brand of deter-
gent.
The dishes are wet. The washing programme was
without a drying phase or with
a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
Activate the rinse aid dispenser.
How to activate the rinse aid dispenser
1. Switch off the appliance.
2. Press and hold the start /cancel button.
3. Turn the programme knob counter-
clockwise until the programme marker
agrees with the first available washing
programme on the control panel.
4. Release the start/cancel button.
– The display shows the electronic ad-
justment of the water softener.
5. Turn the programme knob counter-
clockwise until the programme marker
agrees with the second available wash-
ing programme on the control panel.
– The display shows the current set.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
6. Press the start/cancel button to change
the set.
– The display shows the new adjust-
ment.
7. Turn the programme knob to off posi-
tion to keep the operation.
TECHNICAL DATA
Dimensions Width
Height
Depth
446 mm
850 mm
620 mm
Electrical connection Voltage
Overall power
Fuse
Frequency
220-240 V
2100 W
10 A
50 Hz
Water supply pressure min.
max.
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply
1)
Cold water or hot water max. 60 °C
36 electrolux