ESF4510LOX EN Dishwasher User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................3 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 6 4. CONTROL PANEL ............................................................................................ 7 5. PROGRAMMES.....................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not keep the appliance door open without supervision to prevent to fall on it. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
ENGLISH • The water inlet hose has a safety valve and a sheath with an inner mains cable. • • 5 completed. There can be detergent on the dishes. The appliance can release hot steam if you open the door while a programme operates. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service • • WARNING! Dangerous voltage. If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket.
www.electrolux.com 3.
ENGLISH 4. CONTROL PANEL 1 Auto Off 50º AutoFlex 45º-70º Intensive 70º 1 Hour 50º 2 Reset Save MyFavourite 3 4 5 Program Delay Option Start 8 1 2 3 4 5 3 sec Quick Plus Rinse & Hold EnergySaver Multitab MyFavourite 60º On/off button Program button Programme indicators Display Delay button 7 6 6 Start button 7 Indicators 8 Option button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase.
www.electrolux.com 5.
ENGLISH Programme 1) Water (l) Energy (kWh) Duration (min) 7-8 0.9 - 1.0 50 - 60 8 0.8 30 4 0.1 14 9 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes info.test@dishwasher-production.com For all the necessary information for test performance, send an email to: Write down the product number (PNC) that is on the rating plate. 6. SETTINGS 6.
www.electrolux.com German de‐ grees (°dH) French de‐ grees (°fH) mmol/l Clarke de‐ grees Water softener level 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 <4 <7 <0.7 <5 1 2) 1) Factory setting.
ENGLISH 2. Press Option. • The indicators off. • The indicator continues to flash. The display shows the current setting. • – and go = rinse aid dispenser activated. – = rinse aid dispenser deactivated. 3. Press Option to change the setting. 4. Press the on/off button to confirm the setting. 6.4 MyFavourite With this option you can set and save the programme that you use more frequently. You can only save 1 programme. A new setting cancels the previous one.
www.electrolux.com If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. The display shows the updated programme duration. 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5.
ENGLISH 8.2 How to fill the rinse aid dispenser A D CAUTION! Only use rinse aid specifically designed for dishwashers. B C M AX 4 1 3 2 + 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the release button locks into position.
www.electrolux.com A 30 B The display shows the programme duration. 4. Set the applicable options. 5. Press Start to start the programme. • The washing phase indicator comes on . • The programme duration starts to decrease with steps of 1 minute. D 20 C 1. Press the release button (B) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (A). 3. If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). 4. Close the lid.
ENGLISH 15 Cancelling the programme All buttons are inactive except for the on/off button. Press and hold simultaneously Program and Option until the appliance is in programme selection mode. 1. Press the on/off button or wait for the Auto Off function to automatically deactivate the appliance. If you open the door before the activation of Auto Off, the appliance is automatically deactivated. 2. Close the water tap.
www.electrolux.com 3. Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5. Adjust the released quantity of rinse aid. 6. Activate the rinse aid dispenser. 10.4 Loading the baskets • • • • • • • • • Only use the appliance to wash items that are dishwasher-safe. Do not put in the appliance items made of wood, horn, aluminium, pewter and copper.
ENGLISH 17 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.
www.electrolux.com • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. • To maintain the performance of your appliance at its best, we recommend to use monthly a specific cleaning product for dishwashers. Follow carefully the instructions on the packaging of the product. 12.
ENGLISH Problem and alarm code Possible cause and solution The appliance does not drain the water. • • The display shows . • • The anti-flood device is on. • The display shows . 19 Make sure that the sink spigot is not clogged. Make sure that the filter in the outlet hose is not clog‐ ged. Make sure that the interior filter system is not clog‐ ged. Make sure that the drain hose has no kinks or bends. Close the water tap and contact an Authorised Serv‐ ice Centre.
www.electrolux.com Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre. 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • • • • Poor drying results.
ENGLISH 21 Problem Possible cause and solution Unusual foam during wash‐ ing. • • Use the detergent for dishwashers only. There is a leak in the rinse aid dispenser. Contact an Authorised Service Centre. Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". Silver and stainless steel cutlery were placed to‐ gether. Avoid to put silver and stainless steel items close together.
www.electrolux.com Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 9 Power consumption Left-on mode (W) 5.0 Power consumption Off-mode (W) 0.10 Electrical connection 1) 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g.
ENGLISH 23
156905440-A-092016 www.electrolux.
