ESF5202LOW EN Dishwasher User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................3 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 6 4. CONTROL PANEL............................................................................................. 7 5. PROGRAMMES.....................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com • • • • • • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not keep the appliance door open without supervision to prevent to fall on it. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
ENGLISH • • 5 The appliance can release hot steam if you open the door while a programme operates. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service • • WARNING! Dangerous voltage. If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • • • • Do not sit or stand on the open door.
www.electrolux.com 3.
ENGLISH 4. CONTROL PANEL 1 2 6 1 2 3 4 On/off indicator Programme marker Indicators Half load button 3 5 4 5 Start button 6 Programme knob 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates.
www.electrolux.com 5. PROGRAMMES Programme 2) 3) 4) 5) Degree of soil Programme Type of load phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 1.039 11 Normal soil Crockery and cutlery • • • • Prewash Wash 50 °C Rinses Dry 195 Heavy soil Crockery, cut‐ lery, pots and pans • • • • Prewash Wash 70 °C Rinses Dry 150 - 170 1.5 - 1.6 13 - 15 Normal soil Crockery and cutlery • • • • Prewash Wash 65 °C Rinses Dry 120 - 130 1.3 - 1.
ENGLISH 9 6. SETTINGS 6.1 Programme selection mode and user mode However, if this does not happen, you can set the programme selection mode in the following way: When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Press and hold simultaneously Start and Half Load until the appliance is in programme selection mode. In user mode, the following settings can be changed: • The level of the water softener according to the water hardness. 6.
www.electrolux.com If you use standard detergent or multitablets without salt, set the proper water hardness level to keep the salt refill indicator active. How to set the water softener level The appliance must be in programme selection mode. 1. Make sure that the programme marker on the knob is aligned with the indicator on/off . 2. To enter the user mode, press and hold Half Load. At the same time turn the knob counterclockwise until the programme marker is aligned with the first programme.
ENGLISH 11 B A M AX 4 4. Remove the salt around the opening of the salt container. 5. Turn the cap of the salt container clockwise to close the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. 8.2 How to fill the rinse aid dispenser A D 1 3 2 + - C D CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2.
www.electrolux.com • If the salt indicators is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Start the programme. 9.1 Using the detergent D A B 30 20 C A 30 B 9.3 Setting and starting a programme Starting a programme 1. Open the water tap. 2. Close the appliance door. 3. Turn the knob until the programme marker is aligned with the programme you want to set. • On/off indicator comes on.
ENGLISH 13 10. HINTS AND TIPS 10.1 General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • • • • • • Remove larger residues of food from the dishes into the waste bin. Do not pre-rinse dishes by hand. When needed, use the prewash programme (if available) or select a programme with a prewash phase. Always use the whole space of the baskets.
www.electrolux.com 10.5 Before starting a programme • Make sure that: 10.6 Unloading the baskets • 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then from the upper basket. • • • • • The filters are clean and correctly installed. The cap of the salt container is tight. The spray arms are not clogged. There is dishwasher salt and rinse aid (unless you use multi- tablets).
ENGLISH 15 CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 External cleaning 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. • • • 11.
www.electrolux.com Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. With some problems the end indicator flashes intermittently indicating a malfunction. The majority of problems that can occur can be solved without the need to contact an Authorised Service Centre. WARNING! Repairs not properly done may result in serious risk to the safety of the user. Any repairs must be performed by qualified personnel.
ENGLISH Problem and alarm code Possible cause and solution Small leak from the appliance door. • • The appliance door is difficult to close. • Rattling/knocking sounds from in‐ side the appliance. • • • The appliance trips the circuit-beak‐ • er. • Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 17 The appliance is not level. Loosen or tighten the adjustable feet (if applicable). The appliance door is not centred on the tub.
www.electrolux.com Problem Possible cause and solution There are whitish streaks or • bluish layers on glasses and dishes. • The release quantity of rinse aid is too much. Ad‐ just the rinse aid level to a lower level. The quantity of detergent is too much. There are stains and dry wa‐ • ter drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid level to a higher level. The quality of the rinse aid can be the cause. The dishes are wet.
ENGLISH 19 Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 600 / 850 / 625 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 13 Power consumption Left-on mode (W) 5.0 Power consumption Off-mode (W) 0.
100012740-A-232015 www.electrolux.
