User manual

If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model and serial
number.
This information can be found on the rating plate located on
the right hand side of the dishwasher door (see picture).
Service and spare parts
This product should be serviced by an authorised Service
engineer, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself.
Repairs carried out by inexperienced persons may cause
injury or serious malfunctioning. Contact your local
Service Force Centre.
Always insist on genuine spare parts.
Protection against flooding
In order to prevent water floods, the machine has been
provided with two additional devices, having the following
characteristics:
1. In the water inlet hose (see "Water supply connections").
The device comes into operation as a result of any
damage to the water inlet hose and stops the water inflow.
It functions even with the machine off.
To repair the machine call the Service Centre.
2. In the bottom of the machine: the device comes into
operation as a result of any water leaks in the machine
and it functions only with the machine on.
In case of malfunction, the WASHING and DRYING phase
indicator lights start flashing.
In this case turn off the water tap and call the
Service Centre.
13
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard EN 50242
Reference programme: BIO 50°
Load: 12 standard place settings
Rinse aid selector: position 5
Detergent dosage : 25 g in the dispenser
5 g on the dispenser lid
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket