User manual

Loading your appliance
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing the
performance.
Do not load very small items which can fall through the
baskets.
Open the door and slide out the baskets to load the dishes.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can turn
freely.
The two rear rows of prongs on the lower basket can be easily
lowered to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down (see picture).
- To bring them back to the standing position, just pull them up
again.
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard. Long and/or sharp items of cutlery such
as carving knives must be positioned horizontally in the
upper basket. Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
Silver cutlery tends to go black if mixed with steel cutlery. Place it
in the cutlery basket separate from the others.
For best results we recommend to use the cutlery grid
provided (if the size and the dimensions of the cutlery allow it).
The cutlery basket can be placed either to the left or to the
right of the lower basket.
The upper basket
The upper basket is designed for plates (dessert plates, saucers,
dinner plates of up to 25 cm in diameter), salad bowls, cups and
glasses.
Arrange items so that water
can reach all surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
Light items (plastic bowls etc.)
should be loaded in the upper
basket and arranged so they
do not move.
In case that plates are loaded in the upper
basket:
load them starting from the rear
positions of the basket, tilting
them forwards and avoiding the
front positions near the door.
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher
position.
To move to the higher
position proceed as follows:
1. Move the front runnner
stops (A) of the upper
basket outwards and slide
the basket out.
2. Refit the basket in the
higher position and replace
the stops (A) in their original
position.
When the top basket is in the higher position it will only
take plates up to 20 cm in diameter and you will not be able
to use the cup racks.
After loading your machine always close the door, as an
open door can be a hazard.
8
Using your appliance
US64
US71
RC01
UI50
UI47
UI43
UI44
UI42