User manual

22
If the dishwashing results
are not satisfactory
The dishes are still dirty.
• The wrong dishwashing cycle was selected.
• The dishes were loaded is such a way that the
dishwashing water did not reach all items. The
baskets for the dishes must not be overloaded.
• The filters in the base of the washing compartment
are dirty or incorrectly positioned.
• Good quality detergent was not used, or too little
was used.
• In the case of scale deposits on the dishes: The
special salt dispenser is empty or the water soften-
ing system has been incorrectly set.
• The drain hose is incorrectly positioned.
The dishes do not dry and are not shin-
ing.
• Poor quality rinse aid was used.
• The rinse aid dispenser is empty.
There are smears, streaks, milky spots or
a shiny bluish coating on glasses and
dishes.
• Lower rinse aid dosage.
There are dried water drops on the glass-
es and dishes.
• Increase rinse aid dosage.
• The detergent may be the cause. Contact the de-
tergent manufacturer's customer advice centre.
Glass corrosion
• Contact the detergent manufacturer's customer
advice centre.
Rust spots are visible in the dish-
washing compartment.
The dishwashing compartment is
made from rust-free stainless steel.
Rust spots in the dishwashing com-
partment are due to rust particles
from external sources (rust particles
from water pipes, pans, cutlery,
etc.). Remove such spots with a
commercially-available stainless
steel cleaning product.
Only wash cutlery, dishes and pans
that are suitable for dishwasher use.
A whistling noise can be heard
when washing dishes.
The whistling is not a cause for
concern.
Use a different brand of detergent.
The dishwasher interior light does
not come on.
The mains plug is not
plugged in.
Plug in mains plug.
The bulb in the interior light is faulty.
Contact the Customer Care Depart-
ment.
Malfunction Possible cause Remedy