User manual

Notes for Test Institutes

Testing in accordance with EN 60704 must be car-

ried out with the appliance fully loaded and using the

test cycle (see “Cycle Table”).

Tests in accordance with EN 50242 must be car-

ried out when the salt dispenser in the water softener

and the rinse aid dispenser have been filled with salt

and rinse aid respectively, and using the test cycle

(see “Cycle Table”).

Sample loading arrangements:

Full load:

12 place settings

including serving dishes

Half load:

6 place settings including serving dishes,

leaving alternate positions in the rack free

Amount of detergent re-

quired:

5g + 25g (Type B) 20g (Type B)

Rinse aid setting: 4 (Type III) 4 (Type III)

Upper basket

*) If necessary, move the cup rack from right to left. When doing this, ensure that the cup rack is at the same height.

Lower basket with cutlery basket Cutlery basket