User manual

Water drainage

Drain hose

1 The drain hose must not be kinked, crushed or

entangled.

Connecting the drain hose:

– Maximum permitted height: 1 metre.

– Minimum required height: 40 cm above the bot-

tom edge of the appliance.

Extension hoses

• Extension hoses are available from your dealer or

from our Customer Care Department. To ensure

that the function of the appliance is not impeded,

the internal diameter of extension hoses must be

19 mm.

• Extension hoses must not be laid more than a

maximum distance of 3 metres horizontally; the

maximum permitted height for the connection for

the drain hose is then 85 cm.

Sink outlet connection

• The outlet of the drain hose (ø 19 mm) fits all com-

monly available sink outlet types. The outer diame-

ter of the sink outlet connection must be at least

15 mm.

• The drain hose must be fixed to the sink outlet

connection using the hose clamp supplied.

Water drainage if the dishwasher is built-

in at high level

If the dishwasher is installed at a high level, and the

drain hose connection is less than 30 cm from the

lower edge of the appliance, adapter kit

ET 111099520 must be fitted by the Customer Care

Department.

Water drainage into sink (only possible

with free-standing appliances)

If you wish to hang the drain hose in a wash basin,

use a detachable hose elbow. You can obtain this

from AEG customer service by referring to spare part

number ET 646 069 190.

1. Fit the elbow to the drain hose.

2. Secure the drain hose so that it cannot slide off the

edge of the wash basin.

Pass a piece of cord through the hose elbow and

fix it to the wall or the tap.