User manual

7.1 Using the detergent
A
B
D
30
20
C
M
A
X
1
2
3
4
+
-
B
2
0
0
3
A D
C
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent in the compartment (D).
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
You have not closed the door.
You have not pressed Start to start the
programme.
The programme is completed.
Starting a programme without
delay start
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance. The indicator and the dura-
tion of the last set programme come
on.
3.
Close the appliance door.
4.
Set a programme.
If you want to start the last set pro-
gramme, press Start.
If you want to set a different pro-
gramme, press Program again and
again until the indicator of the pro-
gramme you want to set comes on.
You can also set the applicable op-
tions.
The display shows the duration of the
programme.
5. Press Start to start the programme.
The washing phase indicator comes
on.
The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay
start
1.
Set the programme.
2.
Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
3. The countdown starts automatically.
When the countdown is completed. The
programme starts.
ENGLISH 59