User manual

Problem Possible cause Possible solution
The salt container cap is not
closed correctly.
Ensure that the salt container
cap is correctly closed.
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Rinse aid dosage is too high. Decrease the rinse aid dosage.
Dry water drop stains on
glasses and dishes.
Rinse aid dosage is too low. Increase the rinse aid dosage.
The detergent can be the
cause.
Use a different brand of deter-
gent.
The dishes are wet. You have set a washing pro-
gram without drying phase or
with a decreased drying phase.
Let the door stay ajar for some
minutes before you remove the
dishes.
The dishes are wet and dull. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is activa-
ted (this function automatically
deactivates the rinse aid dis-
penser).
Activate the rinse aid dispenser.
ACTIVATING THE RINSE AID
DISPENSER
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold buttons (4) and (5) at the
same time until the indicators of buttons
(3), (4) and (5) flash.
3. Release button (4) and button (5).
4. Press button (4).
• The indicators of buttons (3) and (5)
go off.
• The indicator of button (4) continues
to flash.
• The display shows the setting of the
rinse aid dispenser.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
5. Press button (4) to change the setting.
The display shows the new adjustment.
6. Switch off the appliance to confirm.
16 electrolux