User Manual

14 electrolux.com.au
8. Eco mode
The internal light lights up when you open the door of
the machine. Select “Yes” with the forward/backward
buttons
to activate the Eco mode and press OK.
The following describes how Eco mode affects
functionality during various stages of dishwashing:
The program selection screen:
• If there is no user interference to the machine during
15 minutes, the machine turns off.
• If there is no user interference to the machine during
2 minutes the backlight turns off.
• When the door is opened, the inner light turns ON
and after 2 minutes it turns OFF.
When a program is operating:
• The backlight is always ON.
• When the door is opened, the inner light turns ON
and after 2 minutes it turns OFF.
To deactivate Eco mode, select “No” with the forward/
backward button
and press OK. In this case, internal
illumination will be lit as long as the door is open.
5. Factory settings
When you enter the menu, “Yes” will be selected and
“All settings will be reset. Could you confirm please?”
expression will be displayed when you confirm with
the confirm button. Press cancel if you do not confirm.
Press confirm to return your machine to the Factory
settings. Factory settings menu will appear again.
Your machine’s factory settings are as follows;
• Favourite Programs are deleted
• Eco-mode is active
• Volume level is 2
• Display brightness level is 5
• Economical time interval is between 22:00-06:00
• Hour is 00:00
• Date is 01.01.2016
Your settings will not be changed if you select “No”
and press confirm.
Favourite Program Setting
You can add the programs and options that you
consider are best for your dishes and you frequently
use to the Programs list in the favourites menu. To set
your favourite Program;
1. Select the Program that you want to select using
the Program button .
2. Add the suitable options for the wash using the
options button if you want to add additional
options to this Program.
3. When you press the favourites button after
completing your Program and option selection, the
screen below will be displayed.
14 electrolux.com.au 15
8. Eco mode
The internal light lights up when you open the door of the
machine. Select “Yes” with the forward/backward key
to activate the Eco mode and press OK.
The following describes how Eco mode affects
functionality during various stages of dishwashing:
The program selection screen:
• If there is no user interference to the machine during 15
minutes, machine turns off.
• If there is no user interference during 2 minutes, display
backlight becomes off.
• When the door is opened, the inner light turns ON and
after 2 minutes it turns OFF
When a program is operating:
• The backlight is always ON.
• When the door is opened, the inner light turns ON and
after 2 minutes it turns OFF.
To deactivate Eco mode, select “No” with the forward/
backward key
and press OK. In this case, internal
illumination will be lit as long as the door is open.
5
. Factory settings
When you enter the menu, “Yes” will be selected and
“All settings will be reset. Could you confirm please?”
expression will be displayed when you confirm with
the confirm key. Press cancel if you do not confirm.
Press confirm to return your machine to the Factory
settings. Factory settings menu will appear again.
Your machine’s factory settings are as follows;
• Favourite Programs are deleted
• Eco-mode is active
• Volume level is 2
• Display brightness level is 2
• Hour is 00:00
After you press “OK”, your favourite Program and options
you have added will be.
Child Lock
You can prevent others from changing your settings while
your machine is operating. Press and hold the child lock
key
on the top left corner of the screen for 3 sec.
“Child lock on” warning will be displayed and a warning
tone will be heard when the child lock is active.
Child lock indicator on the top left corner of the screen
will turn to the locked position. All keys are non-functional
when the child lock is active.
Press and hold the child lock key
for 3 seconds to
cancel the child lock. “Child lock off” warning will be
displayed on the screen and a warning tone will be heard.
Child lock indicator will turn to unlocked position.
• Date is 01.01.2018
Your settings will not be changed if you select “No” and
press confirm.
Favourite Program Setting
You can add the programs and options that you consider
are best for your dishes and you frequently use to the
Programs list in the favourites menu. To set your favourite
Program;
1. Select the Program that you want to select using the
Program key
.
2. Add the suitable options for the wash using the options
key if you want to add additional options to this
Program.
3. When you press the favourites key after completing
your Program and option selection, the screen below will
be displayed.
4. Use forward/backward keys to save the selection
in any of the selections (Favourite1, Favourite2, Favourite3,
Favourite4 and Favourite5).
5. Move Favourite1 to the center of the screen using
forward/backward keys if your are going to save the
selection to Favourite1.
6. The prompt ‘Create favourite program?’ will appear.
Press OK to confirm and save.
7. Press the back key if you do not want to save.
8. You will be redirected to the favourite Program selection
menu when you press OK again.
Time Delay for Wash Program (Delay):
You can delay the starting time of the selected Program
up to 24 hours. Delay setting cannot be made after the
Program has started. The selected Program should not be
started for you to set the delay time.
1. Press the delay key and increase delay for the time
required for the delay.
2. Set the delay time to the desired time using forward/
backward keys . Delay time is increased for 30 minutes
with the forward key and decreased for 30 minutes with
the backward key. Select the delay time by pressing the
confirm key. You can start the delay time countdown by
pressing the start/pause key. The display will show “TIME
DELAY ACTIVE”, and the delay time and the Program time
will be alternately shown on the display until the end of this
time. The selected Program will start when countdown
ends. The time required for the started Program to end will
be shown on the indicator display. All keys except for On/
Off and Delay keys will be disabled when delay is active.
If you want to cancel or set a new time when the
machine is in delay
Press the delay key to cancel the delay and press
confirm by selecting “00:00” as the delay time. The display
will show the latest selected Program and options. Delay
time will not be shown.
Press the delay key again to set a new delay time.
Select the new time using forward/backward keys and
press the start/pause key to start the delay time.
Rinse Aid
The rinse aid helps to dry the dishes without streaks and
stains. The rinse aid is automatically released during the
hot rinse phase. When rinse aid chamber is empty, “LOW
RINSE-AID” warning is shown on the display notifying
to refill rinse aid.
When you stop using combined detergents
• Fill the rinse aid compartment
• Set the suitable rinse aid setting
SETTINGS (CONTINUED)
4. Use forward/backward buttons to save
the selection in any of the selections (Favourite1,
Favourite2, Favourite3, Favourite4 and Favourite5).
5. Move Favourite1 to the center of the screen using
forward/backward buttons if your are going to
save the selection to Favourite1.
6. The prompt ‘Create favourite program?’ will
appear. Press OK to confirm and save.
14 electrolux.com.au 15
8. Eco mode
The internal light lights up when you open the door of the
machine. Select “Yes” with the forward/backward key
to activate the Eco mode and press OK.
The following describes how Eco mode affects
functionality during various stages of dishwashing:
The program selection screen:
• If there is no user interference to the machine during 15
minutes, machine turns off.
• If there is no user interference during 2 minutes, display
backlight becomes off.
• When the door is opened, the inner light turns ON and
after 2 minutes it turns OFF
When a program is operating:
• The backlight is always ON.
• When the door is opened, the inner light turns ON and
after 2 minutes it turns OFF.
To deactivate Eco mode, select “No” with the forward/
backward key
and press OK. In this case, internal
illumination will be lit as long as the door is open.
5
. Factory settings
When you enter the menu, “Yes” will be selected and
“All settings will be reset. Could you confirm please?”
expression will be displayed when you confirm with
the confirm key. Press cancel if you do not confirm.
Press confirm to return your machine to the Factory
settings. Factory settings menu will appear again.
Your machine’s factory settings are as follows;
• Favourite Programs are deleted
• Eco-mode is active
• Volume level is 2
• Display brightness level is 2
• Hour is 00:00
After you press “OK”, your favourite Program and options
you have added will be.
Child Lock
You can prevent others from changing your settings while
your machine is operating. Press and hold the child lock
key
on the top left corner of the screen for 3 sec.
“Child lock on” warning will be displayed and a warning
tone will be heard when the child lock is active.
Child lock indicator on the top left corner of the screen
will turn to the locked position. All keys are non-functional
when the child lock is active.
Press and hold the child lock key
for 3 seconds to
cancel the child lock. “Child lock off” warning will be
displayed on the screen and a warning tone will be heard.
Child lock indicator will turn to unlocked position.
• Date is 01.01.2018
Your settings will not be changed if you select “No” and
press confirm.
Favourite Program Setting
You can add the programs and options that you consider
are best for your dishes and you frequently use to the
Programs list in the favourites menu. To set your favourite
Program;
1. Select the Program that you want to select using the
Program key
.
2. Add the suitable options for the wash using the options
key if you want to add additional options to this
Program.
3. When you press the favourites key after completing
your Program and option selection, the screen below will
be displayed.
4. Use forward/backward keys to save the selection
in any of the selections (Favourite1, Favourite2, Favourite3,
Favourite4 and Favourite5).
5. Move Favourite1 to the center of the screen using
forward/backward keys if your are going to save the
selection to Favourite1.
6. The prompt ‘Create favourite program?’ will appear.
Press OK to confirm and save.
7. Press the back key
if you do not want to save.
8. You will be redirected to the favourite Program selection
menu when you press OK again.
Time Delay for Wash Program (Delay):
You can delay the starting time of the selected Program
up to 24 hours. Delay setting cannot be made after the
Program has started. The selected Program should not be
started for you to set the delay time.
1. Press the delay key and increase delay for the time
required for the delay.
2. Set the delay time to the desired time using forward/
backward keys . Delay time is increased for 30 minutes
with the forward key and decreased for 30 minutes with
the backward key. Select the delay time by pressing the
confirm key. You can start the delay time countdown by
pressing the start/pause key. The display will show “TIME
DELAY ACTIVE”, and the delay time and the Program time
will be alternately shown on the display until the end of this
time. The selected Program will start when countdown
ends. The time required for the started Program to end will
be shown on the indicator display. All keys except for On/
Off and Delay keys will be disabled when delay is active.
If you want to cancel or set a new time when the
machine is in delay
Press the delay key to cancel the delay and press
confirm by selecting “00:00” as the delay time. The display
will show the latest selected Program and options. Delay
time will not be shown.
Press the delay key again to set a new delay time.
Select the new time using forward/backward keys and
press the start/pause key to start the delay time.
Rinse Aid
The rinse aid helps to dry the dishes without streaks and
stains. The rinse aid is automatically released during the
hot rinse phase. When rinse aid chamber is empty, “LOW
RINSE-AID” warning is shown on the display notifying
to refill rinse aid.
When you stop using combined detergents
• Fill the rinse aid compartment
• Set the suitable rinse aid setting
SETTINGS (CONTINUED)
7. Press the back button if you do not want
to save.
8. You will be redirected to the favourite Program
selection menu when you press OK again.
SETTINGS (CONTINUED)