User Manual

24 electrolux.com.au
TROUBLESHOOTING
If the appliance does not start or it stops during
operation, first check if you can solve the problem by
yourself with the help of the information in the table or
contact an Authorised Service Centre.
WARNING!
Repairs not properly done may result in serious
risk to the safety of the user. Any repairs must be
performed by qualied personnel.
With some problems, the display shows an alarm
code. The majority of problems that can occur
can be solved without the need to contact an
Authorised Service Centre.
Problem and alarm code Possible cause and solution
You cannot activate the appliance.
• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.
The program does not start
• Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for the end of the countdown.
The appliance does not fill with water.
The display shows F5
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too low. For this
information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the water
The display shows F2
• Make sure that the sink spigot is not clogged.
• Make sure that the filter in the outlet hose is not clogged.
• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows F1
• Close the water tap and contact an Authorised Service Centre
The appliance stops and starts more
times during operation.
• It is normal. It provides optimal cleaning results and energy savings.
The program lasts too long.
• Select the Extra Fast option to shorten the program time.
• If the delayed start option is set, cancel the delay setting or wait for the end of
the countdown.
The remaining time in the display
increases and skips nearly to the end
of program time.
• This is not a defect. The appliance is working correctly