User manual

5
To select a different level be sure that
the dishwasher is off and then proceed
as follows:
1. Press "Intensive 70°" and "Normal 65°" programme push
buttons simultaneously.
2. While keeping the programme push buttons "Intensive 70°"
and "Normal 65°" pressed switch on the dishwasher by
pressing the On/Off push button.
The On/Off indicator light comes on.
At the same time, the indicator lights of the "Intensive 70°"
and "Normal 65°" push buttons start flashing.
Press the "Intensive 70°" push button, the indicator light of
the "Normal 65°" push button turns off, while the indicator
light of the "Intensive 70°" push button remains fixed for
about 5 seconds and then starts to flash indicating the
current level.
The current level is indicated by the number of flashes
made by the "Intensive 70°" indicator light, that alternates 5
seconds off with a number of flashes, this continues for
about 60 seconds.
Example:
1 flash = level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
3. To change the level, press the "Intensive 70°" programme
push button. Each time the push button is pressed the level
changes.
Example:
If the current level is 3, by pressing the "Intensive 70°"
programme push button once, level 4 is selected.
If the current level is 5, by pressing the "Intensive 70°"
programme push button once, level 1 is selected.
The "Intensive 70°" indicator light remains off for about 5
seconds after which it starts flashing indicating the new
level selected.
4. To memorise the new level, switch off the dishwasher by
pressing the On/Off push button.
Filling with salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
Only fill with salt just before starting one of the complete
washing programmes.
This will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the
machine for any period of time, which may cause
corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3. Using the funnel provided,
pour in the salt until the
container is full.
Do not worry if water over
flows from the unit when
filling with salt, this is quite
normal.
4. Replace the cap making
sure that there is no
trace of salt on the screw
thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
You are reminded of this by the salt indicator light on the
control panel which comes on when the salt has finished.
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer. The function of the machine is not
affected.
SO543
SO542
SALE
SALT
SALZ
SEL
SR14