User manual

2. Turn the programme knob clockwise until
the programme marker agrees with the
first available washing programme on the
control panel.
3. Release the start/cancel button when the
on/off and the start/cancel indicator lights
start to flash.
4. At the same time, the end-of-programme
indicator light starts to flash. The number
of flashes shows the current adjustment.
Example: 5 flashes / pause / 5 flashes =
level 5.
5. Press the start/cancel button to change
the adjustment. Each time you press the
start/cancel button, the adjustment goes
to the subsequent level.
6. Switch off the appliance to keep the op-
eration.
If the water softener is set electronically
to the level 1, the salt indicator light stays
off.
Use of dishwasher salt
Do these steps to fill the salt container:
1. Turn the cap counterclockwise to open
the salt container.
2. Fill the salt container with 1 litre of water
(only with the first operation).
3. Use the funnel to fill the salt container with
salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with salt.
Use of detergent and rinse aid
8
2
4
5
6
1
7
3
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Follow the detergent manufacturer rec-
ommendations on the detergent pack-
aging.
Do these steps to fill the detergent dispenser:
1.
Press the release button
2
to open the
lid
8
of the detergent dispenser.
2.
Put the detergent in the dispenser
3
.
3. If the washing programme has a prewash
phase, put a small quantity of detergent
in the prewash detergent compartment
1
.
4. If you use the detergent tablets, put the
tablet in the detergent dispenser
3
.
electrolux 7