User manual

Programme Degree of soil
Type of load
Programme
phases
Options
Normal soil
Crockery and cut-
lery
Wash 55 °C
Rinses
6)
Fresh soil
Crockery and cut-
lery
Wash 60 °C
Rinse
7)
All Prewash
1)
With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
3)
With this programme you can wash different loads with different soil. A higher temperature
and water pressure in the lower basket, to wash items with heavy soil (e.g. pots and pans).
A lower temperature and water pressure in the upper basket, to wash items with normal
soil (e.g. glassware).
4)
This programme has a high temperature rinsing phase for better hygiene results. During the
rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
5)
It is not possible to apply together the options TimeSaver and XtraPower.
6)
With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
7)
Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
Consumption values
Programme
1)
Duration
(min)
Energy
(kWh)
Water
(l)
195 0.92 10.2
40 - 150 0.6 - 1.4 7 - 14
130 - 140 1.2 - 1.3 14 - 15
150 - 160 1.4 - 1.6 13 - 14
55 - 65 1.0 - 1.2 10 - 11
30 0.8 9
14 0.1 4
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
8
www.electrolux.com